Description
Increases rear travel of seat by 1.25” over manual slides (more leg room).Kit supplies parts for one bucket seat.Fits Either side.Bolts to the factory locations on the floorboard and seat frame and only adds 1/8” to overall seat height.Black anodized frame.Seat belts cannot be mounted to the track.Customer must use factory floor and B-Pillar mounting points.Requires customer to run a 14 gauge 12v fused wire and ground wire.Customer provides own power seat switch or purchases the optional seat switch kit.Same distance of forward seat adjustment as manual slides.Includes new seat track mounting plates, seat frame mounting bolts and track to floorboard mounting bolts.Customer reuses the floorboard mounting nuts.Manufacturer supplies a limited lifetime warranty to the original purchaser.Tested to work with stock seats.This conversion has not been tested with aftermarket seats.Seat track to floor mounting pattern is 14” side to side and 11 inch front to rear.See 14A701-5A for switch kit.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 61710-5A
Manufacturer Reference ‘s:Power seat track,
Product Instructions and Additional Info:
Power Seat Conversion Kit Installation Instruction
