Description
This is a Full Vertical Mount FMVP 1.0HP Aqua-Flo wet end assembly featuring 1 1/2″ x 1 1/2″ plumbing connections (thread diameter approximately 2 3/8″) with adjustable suction side discharge, designed exclusively for 48 frame FMVP pumps. Compatible with 48 frame motors rated at approximately 10-11 Amps on 115V. Works with both single speed and dual speed motors. The suction fitting rotates 90 degrees for flexible positioning. Complete assembly includes: volute, seal, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring, and mounting screws.
Important: Metal mounting bracket not included with this wet end – reuse your existing bracket.
Important: This wet end is designed for jet pumps drawing 10.0 Amps or higher on high speed at 115V – not intended for circulation pumps.
Sizing Guide: Always select horsepower based on your motor’s amperage rating. 48 frame motors measure approximately 5 1/2″ diameter with 1/4″ thru-bolt heads and roughly 5 3/16″ between thru-bolts (measured diagonally). 56 frame motors measure approximately 6 1/4″ diameter with 5/16″ thru-bolt heads and roughly 5 7/8″ between thru-bolts (measured diagonally).
