Description
Front Coil Spring Spacer, 3/8 inch thick, goes between the front lower control arm and spring, perfect for adjusting front end height a little higher / keeping an OE appearance, replaces Original GM p/n 3789664, reproduction
Accurate reproduction of the original GM coil spring spacer used to adjust front ride height while maintaining a factory appearance. Installs between the front lower control arm and coil spring.
- 3/8 thick spacer
- Correct OE-style reproduction
- Raises front end approximately 3/4 to 1-1/2 depending on application
- Replaces GM Part 3789664
- Most cars use two spacers; some use only one from the factory
- Used on the assembly line for fine-tuning vehicle height
Perfect solution for restoring OE stance or achieving a slight lift in the front suspension.
Chevrolet Camaro Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
Chevrolet Chevelle / El Camino / Malibu Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77)
Pontiac Firebird / Trans Am Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72)
Chevrolet Nova / Chevy II Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79)
Pontiac GTO / Lemans / Tempest Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72)
Oldsmobile Cutlass Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77)
Buick Skylark Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67)
Chevrolet Monte Carlo Years:
1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77)
NPD Part Number : C-7425-204A
Manufacturer Reference ‘s: 3789664
