Description
Ford Mustang logo.Black crinkle finish has raised logos with red paint on the Mustang logo.
13 diameter with 2 5/8 tall element.Sets come with mounting hardware including Ford logo die cast center nut.Note that 4 of hood clearance is required from the carburetor gasket area to the bottom of the hood.close hood slowly to confirm sufficient clearance visually.
See 380958-S, 370970-S, 358871-S, 370970-SAK, 9600-1AK, 9600-2AK, 9600-3AK, 9600-4AK, 9600-5AK, 9600-6AK 9600-8AK, 9600-9AK for mounting hardware options.
- _________________________________________________
Not 50 state legal for all year, make, model and engine combinations.
This part is legal for sale or use only on non-emissions controlled vehicles or on vehicles where the part is considered a direct replacement for a factory installed part.
The following vehicles are considered non-emissions controlled vehicles:
1965 and older U.S. manufactured California certified vehicles.
1967 and older U.S. manufactured Federally certified vehicles.
1967 and older Foreign manufactured vehicles.
It is against the law to install this part on an emissions controlled vehicle.
The following vehicles are considered emissions controlled vehicles:
1966 and newer U.S. manufactured California certified vehicles.
1968 and newer U.S. manufactured Federally certified vehicles.
1968 and newer Foreign manufactured vehicles.
- _________________________________________________
1947 (47), 1948 (48), 1949 (49), 1950 (50), 1951 (51), 1952 (52), 1953 (53), 1954 (54), 1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59), 1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67)
Above years shown are used for searches and are not application listings.
NPD Part Number : 9600-37A
Manufacturer Reference ‘s:302-362,
